Facebook link

 

 

 

 

Click Item For Info

Jump Seat Kit (Optional) - PN K-037 . . . . . (click to close)

Jump Seat / Bed Extension - Use this optional jump seat set to sleep lengthwise instead of across the camper. The normal bed length across the camper is 6'. With the jump seat set you can set up the bed lengthwise for a bed 6' 9" long. The tradeoff is loss of floor space.

  • 2 aluminum welded jump seat frames with wood seat
  • cushions with Velcro attach strips
  • bed support bars
  • bed extension board
  •  

    Hanging Wardrobe Kit - PN K-044 . . . . . (click to close)

    This soft sided hanging soft wardrobe is made from heavy duty woven polyester fabric.

  • one zippered compartment for hanging cloths
  • quickly hangs on the side of the Tail Feather Camper wall
  • secured with a clip to the wall's D-ring
  • Folds flat for easy storage
  • can be taken in the house to load it up with supplies
  • Counter Cabinet Kit - PN K-041 . . . . . (click to close)

    This 32" high soft sided cabinet with countertop attaches quickly to the threaded inserts molded into the Tail Feather Camper side panels.

  • cabinet body made from a rugged woven polyester fabric
  • aluminum frame for support
  • durable molded ABS countertop is 21" wide by 20" deep
  • Two zippered compartments are separated by a hard shelf
  • folds flat in seconds for easy storage
  • Table with Bed Supports Kit - PN K-035 . . . . (click to close)

    The table kit comes with a folding table and three support bars used when the table becomes the center board for the bed. The support bars span the distance between the benches and support the table. The dinette cushions are then repositioned to make a 57" x 72" bed.

  • Use the table inside or outside the camper
  • Foamed, lightweight, ABS table top
  • Folding legs
  • Three bed support bars for supporting the table in the bed position
  • POWER PANEL KIT - PN: K-002 . . . . . (click to close)


    The Power Panel Kit comes with one insulated side panel, a Power Center and assembly hardware.
    Includes a Basic Side Panel with a Power Center

  • The panel has 110 Volt AC and 12 Volt DC power-in hookups on the outside for both an extension chord and an external battery
  • The Power Center includes 15 amp/ 110 volt outlets plus a 12 volt outlet
  • USB charger and a digital weather station with temperature and forecast information is standard equipment
  • The Power Panel can replace any side panel and is used to power the LED ceiling lights, the water pump, and any appliances.
  • A tiedown ring is located on the inside of the panel for attaching furnishings or cargo
  • An external tiedown ring on each panel is used to secure the camper to the utility trailer
    Joining hardware and a floor bracket are included in the kit
  • Panels are joined together by three tabs and machine screws. The only tool required to assemble a camper is a screwdriver (preferably chordless)
  • Dinette/Bed Bench Kit - PN: K-031 . . . . . (click to close)

    Dinette/Bed set (cushions and table sold separately) This dinette set comes with two bench seat lockers and converts to a double bed when used with the K-035 Table Kit. The bed is 72' long and 57" wide.

  • The entire set can be installed or removed in minutes and folds flat for storage.
  • Welded aluminum frames powder coated white
  • Removable support legs
  • Tough polyester canvas storage bins
  • Quick release mounting clips
  • Hook and loop strips for securing cushions
  • Dinette Cushion Set Kit - PN K-033 . . . . . (click to close)

    This cushion set fits the standard 5' wide Tail Feather camper. The 3" thick cushions convert from seat cushions to a mattress.

  • Includes four 3" thick cushions and one end shelf cushion for U-shaped dining
  • Cushions are stuffed with medium density foam topped with a layer of Dacron filler
  • Each bench cushion has a loop and hook strip to secure it to the bench seat and wall panel
  • Available in several colors - red/brown/tan strips are standard (see selection in the Online Store)

  • Hanging 3-Shelf Cabinet Kit - PN K-043 . . . . . (click to close)

    This soft sided hanging soft wall cabinet is made from heavy duty woven polyester fabric.

  • Quickly hangs on the side of the Tail Feather Camper wall
  • Contains three zippered compartments
  • Secured with a clip to the wall's D-ring
  • Folds flat for easy storage
  • Can be taken in the house to load it up with supplies
  • Sink Counter Kit - PN K-042 . . . . . (click to close)

    32" high soft side cabinet with sink and faucet attaches quickly to the threaded inserts molded into the Tail Feather Camper side panels.

  • this cabinet is made from a rugged woven polyester fabric
  • aluminum tube frame for support
  • durable countertop 21" wide by 20" deep molded from ABS
  • sink collapses requiring less storage space
  • low profile swivel faucet has an electric switch that activates a small 12 volt pump
  • includes a 5 gal. fresh water tank (cold water only) with electric pump
  • 5 gal. gray water tank that stow in the lower cabinet compartment
  • folds flat in seconds for storage.
  •  


    TAIL FEATHER FURNISHINGS AND COMPONENTS

    furnishings Dinette Cushions Bench Set 3-Shelf Closet Sink Cabinet Table Kit Counter Wardrobe Jump Seat

    All Tail Feather Camper Kit components are designed to be very light weight, extremely durable, and fully collapsible for storage. All the furnishings can be removed and stowed within 15 minutes so you can make room for cargo.

     


     

     

     

    Tail Feather white logo

    Tail Feather Campers and Shelters by

    Teal International Corporation
    Loveland, CO 80537
    970-744-6568 • email: info@tealcamper.com

    ©2013 Teal International Corporation
    United States Patent Issued